Cabinet panel coolers

Cabinet panel cooler AIR-CC2-IP54
Cooling capacities
42 Watt
Air consumption (SCFM/SLPM)
2 SCFM (57 SLPM)
$323.26
Tax excluded
Cabinet Cooler system for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Unlike many of our competitors all of the our Cabinet Cooler  Cabinet Panel Coolers are stainless steel, not just the vortex tube for longer life and flexible use. Cabinet Cooler are compact and can be installed in minutes through a hole in the enclosure. There are virtually no moving parts. Cabinet Panel Cooler are ideal for all IP54, IP14 and IP66. Prevent downtime due to overheating electric and electronic control panels and cabinets. Cabinet Cooler NEMA Type 4-4X-316L (IP-66) For Electronic Control Panels – all external exposed surfaces are of 316L, ideal for pharmaceutical industry and extreme corrosive environments where 303/304 stainless steel is not adequate. As with the NEMA Type 4-4x units, Cabinet Cooler is splash resistant, for use in wash down environments as well as outdoor use and 316L Stainless steel has pharmaceutical grade, food service and extreme corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use. The Cabinet Cooler is normally mounted on the top of the enclosure but if space does not permit, you can use our Side Mount Kit. Using a thermostat and solenoid valve will help to control the air consumption. Cabinet Panel Cooler Mod. AIR-CC2-IP54 See also: VORTEX TUBES, TOOL COOLING Download the PDF Doc for more information: Data Sheet Outline Pdf Outline Dwg
Cabinet panel cooler AIR-CC4-IP54
Cooling capacities
85 Watt
Air consumption (SCFM/SLPM)
4 SCFM (113 SLPM)
$323.26
Tax excluded
 Cabinet Cooler system for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Unlike many of our competitors all of the our Cabinet Cooler  Cabinet Panel Coolers are stainless steel, not just the vortex tube for longer life and flexible use. Cabinet Cooler are compact and can be installed in minutes through a hole in the enclosure. There are virtually no moving parts. Cabinet Panel Cooler are ideal for all IP54, IP14 and IP66.  Prevent downtime due to overheating electric and electronic control panels and cabinets.  Cabinet Cooler NEMA Type 4-4X-316L (IP-66) For Electronic Control Panels – all external exposed surfaces are of 316L, ideal for pharmaceutical industry and extreme corrosive environments where 303/304 stainless steel is not adequate. As with the NEMA Type 4-4x units, Cabinet Cooler is splash resistant, for use in wash down environments as well as outdoor use and 316L Stainless steel has pharmaceutical grade, food service and extreme corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use. The Cabinet Cooler is normally mounted on the top of the enclosure but if space does not permit, you can use our Side Mount Kit. Using a thermostat and solenoid valve will help to control the air consumption. Cabinet Panel Coolers Mod. AIR-CC4-IP54 See also: VORTEX TUBES, TOOL COOLING Download the PDF Doc for more information: Data Sheet Outline Pdf Outline Dwg
Cabinet panel cooler AIR-CC8-IP54
Cooling capacities
170 Watt
Air consumption (SCFM/SLPM)
8 SCFM (227 SLPM)
$323.26
Tax excluded
 Cabinet Cooler system for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Unlike many of our competitors all of the our Cabinet Cooler  Cabinet Panel Coolers are stainless steel, not just the vortex tube for longer life and flexible use. Cabinet Cooler are compact and can be installed in minutes through a hole in the enclosure. There are virtually no moving parts. Cabinet Panel Cooler are ideal for all IP54, IP14 and IP66.  Prevent downtime due to overheating electric and electronic control panels and cabinets.  Cabinet Cooler NEMA Type 4-4X-316L (IP-66) For Electronic Control Panels – all external exposed surfaces are of 316L, ideal for pharmaceutical industry and extreme corrosive environments where 303/304 stainless steel is not adequate. As with the NEMA Type 4-4x units, Cabinet Cooler is splash resistant, for use in wash down environments as well as outdoor use and 316L Stainless steel has pharmaceutical grade, food service and extreme corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use. The Cabinet Cooler is normally mounted on the top of the enclosure but if space does not permit, you can use our Side Mount Kit. Using a thermostat and solenoid valve will help to control the air consumption. Cabinet Panel Coolers Mod. AIR-CC8-IP54 See also: VORTEX TUBES, TOOL COOLING Download the PDF Doc for more information: Data Sheet Outline Pdf Outline Dwg
Cabinet panel cooler AIR-CC10-IP54
Cooling capacities
214 Watt
Air consumption (SCFM/SLPM)
10 SCFM (283 SLPM )
$378.05
Tax excluded
 Cabinet Cooler system for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Unlike many of our competitors all of the our Cabinet Cooler  Cabinet Panel Coolers are stainless steel, not just the vortex tube for longer life and flexible use. Cabinet Cooler are compact and can be installed in minutes through a hole in the enclosure. There are virtually no moving parts. Cabinet Panel Cooler are ideal for all IP54, IP14 and IP66.  Prevent downtime due to overheating electric and electronic control panels and cabinets.  Cabinet Cooler NEMA Type 4-4X-316L (IP-66) For Electronic Control Panels – all external exposed surfaces are of 316L, ideal for pharmaceutical industry and extreme corrosive environments where 303/304 stainless steel is not adequate. As with the NEMA Type 4-4x units, Cabinet Cooler is splash resistant, for use in wash down environments as well as outdoor use and 316L Stainless steel has pharmaceutical grade, food service and extreme corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use. The Cabinet Cooler is normally mounted on the top of the enclosure but if space does not permit, you can use our Side Mount Kit. Using a thermostat and solenoid valve will help to control the air consumption. Cabinet Panel Coolers Mod. AIR-CC10-IP54 See also:VORTEX TUBES, TOOL COOLING Download the PDF Doc for more information: Data Sheet Outline Pdf Outline Dwg
Cabinet panel cooler AIR-CC15-IP54
Cooling capacities
322 Watt
Air consumption (SCFM/SLPM)
15 SCFM (425 SLPM)
$378.05
Tax excluded
 Cabinet Cooler system for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Unlike many of our competitors all of the our Cabinet Cooler  Cabinet Panel Coolers are stainless steel, not just the vortex tube for longer life and flexible use. Cabinet Cooler are compact and can be installed in minutes through a hole in the enclosure. There are virtually no moving parts. Cabinet Panel Cooler are ideal for all IP54, IP14 and IP66.  Prevent downtime due to overheating electric and electronic control panels and cabinets.  Cabinet Cooler NEMA Type 4-4X-316L (IP-66) For Electronic Control Panels – all external exposed surfaces are of 316L, ideal for pharmaceutical industry and extreme corrosive environments where 303/304 stainless steel is not adequate. As with the NEMA Type 4-4x units, Cabinet Cooler is splash resistant, for use in wash down environments as well as outdoor use and 316L Stainless steel has pharmaceutical grade, food service and extreme corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use. The Cabinet Cooler is normally mounted on the top of the enclosure but if space does not permit, you can use our Side Mount Kit. Using a thermostat and solenoid valve will help to control the air consumption. Cabinet Panel Coolers Mod. AIR-CC15-IP54 See also:VORTEX TUBES, TOOL COOLING Download the PDF Doc for more information: Data Sheet Outline Pdf Outline Dwg
Cabinet panel cooler AIR-CC25-IP54
Cooling capacities
527 Watt
Air consumption (SCFM/SLPM)
25 SCFM (708 SLPM)
$378.05
Tax excluded
 Cabinet Cooler system for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Unlike many of our competitors all of the our Cabinet Cooler  Cabinet Panel Coolers are stainless steel, not just the vortex tube for longer life and flexible use. Cabinet Cooler are compact and can be installed in minutes through a hole in the enclosure. There are virtually no moving parts. Cabinet Panel Cooler are ideal for all IP54, IP14 and IP66.  Prevent downtime due to overheating electric and electronic control panels and cabinets.  Cabinet Cooler NEMA Type 4-4X-316L (IP-66) For Electronic Control Panels – all external exposed surfaces are of 316L, ideal for pharmaceutical industry and extreme corrosive environments where 303/304 stainless steel is not adequate. As with the NEMA Type 4-4x units, Cabinet Cooler is splash resistant, for use in wash down environments as well as outdoor use and 316L Stainless steel has pharmaceutical grade, food service and extreme corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use. The Cabinet Cooler is normally mounted on the top of the enclosure but if space does not permit, you can use our Side Mount Kit. Using a thermostat and solenoid valve will help to control the air consumption. Cabinet Panel Coolers Mod. AIR-CC25-IP54 See also: VORTEX TUBES, TOOL COOLING Download the PDF Doc for more information: Data Sheet Outline Pdf Outline Dwg
Cabinet panel cooler AIR-CC30-IP54
Cooling capacities
615 Watt
Air consumption (SCFM/SLPM)
30 SCFM (850 SLPM)
$378.05
Tax excluded
 Cabinet Cooler system for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Unlike many of our competitors all of the our Cabinet Cooler  Cabinet Panel Coolers are stainless steel, not just the vortex tube for longer life and flexible use. Cabinet Cooler are compact and can be installed in minutes through a hole in the enclosure. There are virtually no moving parts. Cabinet Panel Cooler are ideal for all IP54, IP14 and IP66.  Prevent downtime due to overheating electric and electronic control panels and cabinets.  Cabinet Cooler NEMA Type 4-4X-316L (IP-66) For Electronic Control Panels – all external exposed surfaces are of 316L, ideal for pharmaceutical industry and extreme corrosive environments where 303/304 stainless steel is not adequate. As with the NEMA Type 4-4x units, Cabinet Cooler is splash resistant, for use in wash down environments as well as outdoor use and 316L Stainless steel has pharmaceutical grade, food service and extreme corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use. The Cabinet Cooler is normally mounted on the top of the enclosure but if space does not permit, you can use our Side Mount Kit. Using a thermostat and solenoid valve will help to control the air consumption. Cabinet Panel Coolers Mod. AIR-CC30-IP54 See also: VORTEX TUBES, TOOL COOLING  Download the PDF Doc for more information: Data Sheet Outline Pdf Outline Dwg
Cabinet panel cooler AIR-CC40-IP54
Cooling capacities
849 Watt
Air consumption (SCFM/SLPM)
39.3 SCFM (1133 SLPM)
$378.05
Tax excluded
 Cabinet Cooler system for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Unlike many of our competitors all of the our Cabinet Cooler  Cabinet Panel Coolers are stainless steel, not just the vortex tube for longer life and flexible use. Cabinet Cooler are compact and can be installed in minutes through a hole in the enclosure. There are virtually no moving parts. Cabinet Panel Cooler are ideal for all IP54, IP14 and IP66.  Prevent downtime due to overheating electric and electronic control panels and cabinets.  Cabinet Cooler NEMA Type 4-4X-316L (IP-66) For Electronic Control Panels – all external exposed surfaces are of 316L, ideal for pharmaceutical industry and extreme corrosive environments where 303/304 stainless steel is not adequate. As with the NEMA Type 4-4x units, Cabinet Cooler is splash resistant, for use in wash down environments as well as outdoor use and 316L Stainless steel has pharmaceutical grade, food service and extreme corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use. The Cabinet Cooler is normally mounted on the top of the enclosure but if space does not permit, you can use our Side Mount Kit. Using a thermostat and solenoid valve will help to control the air consumption. Cabinet Panel Coolers Mod. AIR-CC40-IP54 See also: VORTEX TUBES, TOOL COOLING  Download the PDF Doc for more information: Data Sheet Outline Pdf Outline Dwg
Cabinet panel cooler AIR-CC50-IP54
Cooling capacities
1054 Watt
Air consumption (SCFM/SLPM)
50 SCFM (1416 SLPM)
$756.10
Tax excluded
 Cabinet Cooler system for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Unlike many of our competitors all of the our Cabinet Cooler  Cabinet Panel Coolers are stainless steel, not just the vortex tube for longer life and flexible use. Cabinet Cooler are compact and can be installed in minutes through a hole in the enclosure. There are virtually no moving parts. Cabinet Panel Cooler are ideal for all IP54, IP14 and IP66.  Prevent downtime due to overheating electric and electronic control panels and cabinets.  Cabinet Cooler NEMA Type 4-4X-316L (IP-66) For Electronic Control Panels – all external exposed surfaces are of 316L, ideal for pharmaceutical industry and extreme corrosive environments where 303/304 stainless steel is not adequate. As with the NEMA Type 4-4x units, Cabinet Cooler is splash resistant, for use in wash down environments as well as outdoor use and 316L Stainless steel has pharmaceutical grade, food service and extreme corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use. The Cabinet Cooler is normally mounted on the top of the enclosure but if space does not permit, you can use our Side Mount Kit. Using a thermostat and solenoid valve will help to control the air consumption. Cabinet Panel Coolers Mod. AIR-CC50-IP54 See also: VORTEX TUBES, TOOL COOLING  Download the PDF Doc for more information: Data Sheet Outline Pdf Outline Dwg
Cabinet panel cooler AIR-CC60-IP54
Cooling capacities
1230 Watt
Air consumption (SCFM/SLPM)
60 SCFM (1700 SLPM )
$756.10
Tax excluded
 Cabinet Cooler system for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Unlike many of our competitors all of the our Cabinet Cooler  Cabinet Panel Coolers are stainless steel, not just the vortex tube for longer life and flexible use. Cabinet Cooler are compact and can be installed in minutes through a hole in the enclosure. There are virtually no moving parts. Cabinet Panel Cooler are ideal for all IP54, IP14 and IP66.  Prevent downtime due to overheating electric and electronic control panels and cabinets.  Cabinet Cooler NEMA Type 4-4X-316L (IP-66) For Electronic Control Panels – all external exposed surfaces are of 316L, ideal for pharmaceutical industry and extreme corrosive environments where 303/304 stainless steel is not adequate. As with the NEMA Type 4-4x units, Cabinet Cooler is splash resistant, for use in wash down environments as well as outdoor use and 316L Stainless steel has pharmaceutical grade, food service and extreme corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use. The Cabinet Cooler is normally mounted on the top of the enclosure but if space does not permit, you can use our Side Mount Kit. Using a thermostat and solenoid valve will help to control the air consumption. Cabinet Panel Coolers Mod. AIR-CC60-IP54 See also: VORTEX TUBES, TOOL COOLING  Download the PDF Doc for more information: Data Sheet Outline Pdf Outline Dwg
Cabinet panel cooler AIR-CC70-IP54
Cooling capacities
1462 Watt
Air consumption (SCFM/SLPM)
70 SCFM (1983 SLPM )
$756.10
Tax excluded
 Cabinet Cooler system for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Unlike many of our competitors all of the our Cabinet Cooler  Cabinet Panel Coolers are stainless steel, not just the vortex tube for longer life and flexible use. Cabinet Cooler are compact and can be installed in minutes through a hole in the enclosure. There are virtually no moving parts. Cabinet Panel Cooler are ideal for all IP54, IP14 and IP66.  Prevent downtime due to overheating electric and electronic control panels and cabinets.  Cabinet Cooler NEMA Type 4-4X-316L (IP-66) For Electronic Control Panels – all external exposed surfaces are of 316L, ideal for pharmaceutical industry and extreme corrosive environments where 303/304 stainless steel is not adequate. As with the NEMA Type 4-4x units, Cabinet Cooler is splash resistant, for use in wash down environments as well as outdoor use and 316L Stainless steel has pharmaceutical grade, food service and extreme corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use. The Cabinet Cooler is normally mounted on the top of the enclosure but if space does not permit, you can use our Side Mount Kit. Using a thermostat and solenoid valve will help to control the air consumption. Cabinet Panel Coolers Mod. AIR-CC70-IP54 See also: VORTEX TUBES, TOOL COOLING  Download the PDF Doc for more information: Data Sheet Outline Pdf Outline Dwg
Cabinet panel cooler AIR-CC80-IP54
Cooling capacities
1698 Watt
Air consumption (SCFM/SLPM)
80 SCFM (2266 SLPM)
$756.10
Tax excluded
 Cabinet Cooler system for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Unlike many of our competitors all of the our Cabinet Cooler  Cabinet Panel Coolers are stainless steel, not just the vortex tube for longer life and flexible use. Cabinet Cooler are compact and can be installed in minutes through a hole in the enclosure. There are virtually no moving parts. Cabinet Panel Cooler are ideal for all IP54, IP14 and IP66.  Prevent downtime due to overheating electric and electronic control panels and cabinets.  Cabinet Cooler NEMA Type 4-4X-316L (IP-66) For Electronic Control Panels – all external exposed surfaces are of 316L, ideal for pharmaceutical industry and extreme corrosive environments where 303/304 stainless steel is not adequate. As with the NEMA Type 4-4x units, Cabinet Cooler is splash resistant, for use in wash down environments as well as outdoor use and 316L Stainless steel has pharmaceutical grade, food service and extreme corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use. The Cabinet Cooler is normally mounted on the top of the enclosure but if space does not permit, you can use our Side Mount Kit. Using a thermostat and solenoid valve will help to control the air consumption. Cabinet Panel Coolers Mod. AIR-CC80-IP54 See also: VORTEX TUBES, TOOL COOLING  Download the PDF Doc for more information: Data Sheet Outline Pdf Outline Dwg
Cabinet panel cooler AIR-CC4-IP14
Cooling capacities
85 Watt
Air consumption (SCFM/SLPM)
4 SCFM (113 SLPM)
$364.90
Tax excluded
 Cabinet Cooler system for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Unlike many of our competitors all of the our Cabinet Cooler  Cabinet Panel Coolers are stainless steel, not just the vortex tube for longer life and flexible use. Cabinet Cooler are compact and can be installed in minutes through a hole in the enclosure. There are virtually no moving parts. Cabinet Panel Cooler are ideal for all IP54, IP14 and IP66.  Prevent downtime due to overheating electric and electronic control panels and cabinets.  Cabinet Cooler NEMA Type 4-4X-316L (IP-66) For Electronic Control Panels – all external exposed surfaces are of 316L, ideal for pharmaceutical industry and extreme corrosive environments where 303/304 stainless steel is not adequate. As with the NEMA Type 4-4x units, Cabinet Cooler is splash resistant, for use in wash down environments as well as outdoor use and 316L Stainless steel has pharmaceutical grade, food service and extreme corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use. The Cabinet Cooler is normally mounted on the top of the enclosure but if space does not permit, you can use our Side Mount Kit. Using a thermostat and solenoid valve will help to control the air consumption. Cabinet Panel Coolers Mod. AIR-CC4-IP14 See also: VORTEX TUBES, TOOL COOLING  Download the PDF Doc for more information: Data Sheet Outline Pdf Outline Dwg
Cabinet panel cooler AIR-CC8-IP14
Cooling capacities
170 Watt
Air consumption (SCFM/SLPM)
8 SCFM (227 SLPM)
$364.90
Tax excluded
 Cabinet Cooler system for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Unlike many of our competitors all of the our Cabinet Cooler  Cabinet Panel Coolers are stainless steel, not just the vortex tube for longer life and flexible use. Cabinet Cooler are compact and can be installed in minutes through a hole in the enclosure. There are virtually no moving parts. Cabinet Panel Cooler are ideal for all IP54, IP14 and IP66.  Prevent downtime due to overheating electric and electronic control panels and cabinets.  Cabinet Cooler NEMA Type 4-4X-316L (IP-66) For Electronic Control Panels – all external exposed surfaces are of 316L, ideal for pharmaceutical industry and extreme corrosive environments where 303/304 stainless steel is not adequate. As with the NEMA Type 4-4x units, Cabinet Cooler is splash resistant, for use in wash down environments as well as outdoor use and 316L Stainless steel has pharmaceutical grade, food service and extreme corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use. The Cabinet Cooler is normally mounted on the top of the enclosure but if space does not permit, you can use our Side Mount Kit. Using a thermostat and solenoid valve will help to control the air consumption. Cabinet Panel Coolers Mod. AIR-CC8-IP14 See also: VORTEX TUBES, TOOL COOLING  Download the PDF Doc for more information: Data Sheet Outline Pdf Outline Dwg
Cabinet panel cooler AIR-CC10-IP14
Cooling capacities
214 Watt
Air consumption (SCFM/SLPM)
10 SCFM (283 SLPM )
$422.98
Tax excluded
 Cabinet Cooler system for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Unlike many of our competitors all of the our Cabinet Cooler  Cabinet Panel Coolers are stainless steel, not just the vortex tube for longer life and flexible use. Cabinet Cooler are compact and can be installed in minutes through a hole in the enclosure. There are virtually no moving parts. Cabinet Panel Cooler are ideal for all IP54, IP14 and IP66.  Prevent downtime due to overheating electric and electronic control panels and cabinets.  Cabinet Cooler NEMA Type 4-4X-316L (IP-66) For Electronic Control Panels – all external exposed surfaces are of 316L, ideal for pharmaceutical industry and extreme corrosive environments where 303/304 stainless steel is not adequate. As with the NEMA Type 4-4x units, Cabinet Cooler is splash resistant, for use in wash down environments as well as outdoor use and 316L Stainless steel has pharmaceutical grade, food service and extreme corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use. The Cabinet Cooler is normally mounted on the top of the enclosure but if space does not permit, you can use our Side Mount Kit. Using a thermostat and solenoid valve will help to control the air consumption. Cabinet Panel Coolers Mod. AIR-CC10-IP14 See also:VORTEX TUBES, TOOL COOLING Download the PDF Doc for more information: Data Sheet Outline Pdf Outline Dwg
Cabinet panel cooler AIR-CC15-IP14
Cooling capacities
322 Watt
Air consumption (SCFM/SLPM)
15 SCFM (425 SLPM)
$422.98
Tax excluded
 Cabinet Cooler system for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Unlike many of our competitors all of the our Cabinet Cooler  Cabinet Panel Coolers are stainless steel, not just the vortex tube for longer life and flexible use. Cabinet Cooler are compact and can be installed in minutes through a hole in the enclosure. There are virtually no moving parts. Cabinet Panel Cooler are ideal for all IP54, IP14 and IP66.  Prevent downtime due to overheating electric and electronic control panels and cabinets.  Cabinet Cooler NEMA Type 4-4X-316L (IP-66) For Electronic Control Panels – all external exposed surfaces are of 316L, ideal for pharmaceutical industry and extreme corrosive environments where 303/304 stainless steel is not adequate. As with the NEMA Type 4-4x units, Cabinet Cooler is splash resistant, for use in wash down environments as well as outdoor use and 316L Stainless steel has pharmaceutical grade, food service and extreme corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use. The Cabinet Cooler is normally mounted on the top of the enclosure but if space does not permit, you can use our Side Mount Kit. Using a thermostat and solenoid valve will help to control the air consumption. Cabinet Panel Coolers Mod. AIR-CC15-IP14 See also: VORTEX TUBES, TOOL COOLING  Download the PDF Doc for more information: Data Sheet Outline Pdf Outline Dwg
Cabinet panel cooler AIR-CC25-IP14
Cooling capacities
527 Watt
Air consumption (SCFM/SLPM)
25 SCFM (708 SLPM)
$422.98
Tax excluded
 Cabinet Cooler system for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Unlike many of our competitors all of the our Cabinet Cooler  Cabinet Panel Coolers are stainless steel, not just the vortex tube for longer life and flexible use. Cabinet Cooler are compact and can be installed in minutes through a hole in the enclosure. There are virtually no moving parts. Cabinet Panel Cooler are ideal for all IP54, IP14 and IP66.  Prevent downtime due to overheating electric and electronic control panels and cabinets.  Cabinet Cooler NEMA Type 4-4X-316L (IP-66) For Electronic Control Panels – all external exposed surfaces are of 316L, ideal for pharmaceutical industry and extreme corrosive environments where 303/304 stainless steel is not adequate. As with the NEMA Type 4-4x units, Cabinet Cooler is splash resistant, for use in wash down environments as well as outdoor use and 316L Stainless steel has pharmaceutical grade, food service and extreme corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use. The Cabinet Cooler is normally mounted on the top of the enclosure but if space does not permit, you can use our Side Mount Kit. Using a thermostat and solenoid valve will help to control the air consumption. Cabinet Panel Coolers Mod. AIR-CC25-IP14 See also: VORTEX TUBES, TOOL COOLING  Download the PDF Doc for more information: Data Sheet Outline Pdf Outline Dwg
Cabinet panel cooler AIR-CC30-IP14
Cooling capacities
615 Watt
Air consumption (SCFM/SLPM)
30 SCFM (850 SLPM)
$422.98
Tax excluded
 Cabinet Cooler system for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Unlike many of our competitors all of the our Cabinet Cooler  Cabinet Panel Coolers are stainless steel, not just the vortex tube for longer life and flexible use. Cabinet Cooler are compact and can be installed in minutes through a hole in the enclosure. There are virtually no moving parts. Cabinet Panel Cooler are ideal for all IP54, IP14 and IP66.  Prevent downtime due to overheating electric and electronic control panels and cabinets.  Cabinet Cooler NEMA Type 4-4X-316L (IP-66) For Electronic Control Panels – all external exposed surfaces are of 316L, ideal for pharmaceutical industry and extreme corrosive environments where 303/304 stainless steel is not adequate. As with the NEMA Type 4-4x units, Cabinet Cooler is splash resistant, for use in wash down environments as well as outdoor use and 316L Stainless steel has pharmaceutical grade, food service and extreme corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use. The Cabinet Cooler is normally mounted on the top of the enclosure but if space does not permit, you can use our Side Mount Kit. Using a thermostat and solenoid valve will help to control the air consumption. Cabinet Panel Coolers Mod. AIR-CC30-IP14 See also: VORTEX TUBES, TOOL COOLING  Download the PDF Doc for more information: Data Sheet Outline Pdf Outline Dwg
Cabinet panel cooler AIR-CC40-IP14
Cooling capacities
849 Watt
Air consumption (SCFM/SLPM)
39.3 SCFM (1133 SLPM)
$422.98
Tax excluded
 Cabinet Cooler system for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Unlike many of our competitors all of the our Cabinet Cooler  Cabinet Panel Coolers are stainless steel, not just the vortex tube for longer life and flexible use. Cabinet Cooler are compact and can be installed in minutes through a hole in the enclosure. There are virtually no moving parts. Cabinet Panel Cooler are ideal for all IP54, IP14 and IP66.  Prevent downtime due to overheating electric and electronic control panels and cabinets.  Cabinet Cooler NEMA Type 4-4X-316L (IP-66) For Electronic Control Panels – all external exposed surfaces are of 316L, ideal for pharmaceutical industry and extreme corrosive environments where 303/304 stainless steel is not adequate. As with the NEMA Type 4-4x units, Cabinet Cooler is splash resistant, for use in wash down environments as well as outdoor use and 316L Stainless steel has pharmaceutical grade, food service and extreme corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use. The Cabinet Cooler is normally mounted on the top of the enclosure but if space does not permit, you can use our Side Mount Kit. Using a thermostat and solenoid valve will help to control the air consumption. Cabinet Panel Coolers Mod. AIR-CC40-IP14 See also: VORTEX TUBES, TOOL COOLING  Download the PDF Doc for more information: Data Sheet Outline Pdf Outline Dwg
Cabinet panel cooler AIR-CC104-IP66
Cooling capacities
85 Watt
Air consumption (SCFM/SLPM)
4 SCFM (113 SLPM)
$441.61
Tax excluded
 Cabinet Cooler system for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Unlike many of our competitors all of the our Cabinet Cooler  Cabinet Panel Coolers are stainless steel, not just the vortex tube for longer life and flexible use. Cabinet Cooler are compact and can be installed in minutes through a hole in the enclosure. There are virtually no moving parts. Cabinet Panel Cooler are ideal for all IP54, IP14 and IP66.  Prevent downtime due to overheating electric and electronic control panels and cabinets.  Cabinet Cooler NEMA Type 4-4X-316L (IP-66) For Electronic Control Panels – all external exposed surfaces are of 316L, ideal for pharmaceutical industry and extreme corrosive environments where 303/304 stainless steel is not adequate. As with the NEMA Type 4-4x units, Cabinet Cooler is splash resistant, for use in wash down environments as well as outdoor use and 316L Stainless steel has pharmaceutical grade, food service and extreme corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use. The Cabinet Cooler is normally mounted on the top of the enclosure but if space does not permit, you can use our Side Mount Kit. Using a thermostat and solenoid valve will help to control the air consumption. Cabinet Panel Coolers Mod. AIR-CC104-IP66 See also: VORTEX TUBES, TOOL COOLING  Download the PDF Doc for more information: Data Sheet Outline Pdf Outline Dwg
Cabinet panel cooler AIR-CC108-IP66
Cooling capacities
170 Watt
Air consumption (SCFM/SLPM)
8 SCFM (227 SLPM)
$441.61
Tax excluded
 Cabinet Cooler system for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Unlike many of our competitors all of the our Cabinet Cooler  Cabinet Panel Coolers are stainless steel, not just the vortex tube for longer life and flexible use. Cabinet Cooler are compact and can be installed in minutes through a hole in the enclosure. There are virtually no moving parts. Cabinet Panel Cooler are ideal for all IP54, IP14 and IP66.  Prevent downtime due to overheating electric and electronic control panels and cabinets.  Cabinet Cooler NEMA Type 4-4X-316L (IP-66) For Electronic Control Panels – all external exposed surfaces are of 316L, ideal for pharmaceutical industry and extreme corrosive environments where 303/304 stainless steel is not adequate. As with the NEMA Type 4-4x units, Cabinet Cooler is splash resistant, for use in wash down environments as well as outdoor use and 316L Stainless steel has pharmaceutical grade, food service and extreme corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use. The Cabinet Cooler is normally mounted on the top of the enclosure but if space does not permit, you can use our Side Mount Kit. Using a thermostat and solenoid valve will help to control the air consumption. Cabinet Panel Coolers Mod. AIR-CC108-IP66 See also: VORTEX TUBES, TOOL COOLING  Download the PDF Doc for more information: Data Sheet Outline Pdf Outline Dwg
Cabinet panel cooler AIR-CC110-IP66
Cooling capacities
214 Watt
Air consumption (SCFM/SLPM)
10 SCFM (283 SLPM )
$475.58
Tax excluded
 Cabinet Cooler system for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Unlike many of our competitors all of the our Cabinet Cooler  Cabinet Panel Coolers are stainless steel, not just the vortex tube for longer life and flexible use. Cabinet Cooler are compact and can be installed in minutes through a hole in the enclosure. There are virtually no moving parts. Cabinet Panel Cooler are ideal for all IP54, IP14 and IP66.  Prevent downtime due to overheating electric and electronic control panels and cabinets.  Cabinet Cooler NEMA Type 4-4X-316L (IP-66) For Electronic Control Panels – all external exposed surfaces are of 316L, ideal for pharmaceutical industry and extreme corrosive environments where 303/304 stainless steel is not adequate. As with the NEMA Type 4-4x units, Cabinet Cooler is splash resistant, for use in wash down environments as well as outdoor use and 316L Stainless steel has pharmaceutical grade, food service and extreme corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use. The Cabinet Cooler is normally mounted on the top of the enclosure but if space does not permit, you can use our Side Mount Kit. Using a thermostat and solenoid valve will help to control the air consumption. Cabinet Panel Coolers Mod. AIR-CC110-IP66 See also:VORTEX TUBES, TOOL COOLING Download the PDF Doc for more information: Data Sheet Outline Pdf Outline Dwg
Cabinet panel cooler AIR-CC115-IP66
Cooling capacities
322 Watt
Air consumption (SCFM/SLPM)
15 SCFM (425 SLPM)
$475.58
Tax excluded
 Cabinet Cooler system for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Unlike many of our competitors all of the our Cabinet Cooler  Cabinet Panel Coolers are stainless steel, not just the vortex tube for longer life and flexible use. Cabinet Cooler are compact and can be installed in minutes through a hole in the enclosure. There are virtually no moving parts. Cabinet Panel Cooler are ideal for all IP54, IP14 and IP66.  Prevent downtime due to overheating electric and electronic control panels and cabinets.  Cabinet Cooler NEMA Type 4-4X-316L (IP-66) For Electronic Control Panels – all external exposed surfaces are of 316L, ideal for pharmaceutical industry and extreme corrosive environments where 303/304 stainless steel is not adequate. As with the NEMA Type 4-4x units, Cabinet Cooler is splash resistant, for use in wash down environments as well as outdoor use and 316L Stainless steel has pharmaceutical grade, food service and extreme corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use. The Cabinet Cooler is normally mounted on the top of the enclosure but if space does not permit, you can use our Side Mount Kit. Using a thermostat and solenoid valve will help to control the air consumption. Cabinet Panel Coolers Mod. AIR-CC115-IP66 See also: VORTEX TUBES, TOOL COOLING  Download the PDF Doc for more information: Data Sheet Outline Pdf Outline Dwg
Cabinet panel cooler AIR-CC125-IP66
Cooling capacities
527 Watt
Air consumption (SCFM/SLPM)
25 SCFM (708 SLPM)
$475.58
Tax excluded
 Cabinet Cooler system for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Unlike many of our competitors all of the our Cabinet Cooler  Cabinet Panel Coolers are stainless steel, not just the vortex tube for longer life and flexible use. Cabinet Cooler are compact and can be installed in minutes through a hole in the enclosure. There are virtually no moving parts. Cabinet Panel Cooler are ideal for all IP54, IP14 and IP66.  Prevent downtime due to overheating electric and electronic control panels and cabinets.  Cabinet Cooler NEMA Type 4-4X-316L (IP-66) For Electronic Control Panels – all external exposed surfaces are of 316L, ideal for pharmaceutical industry and extreme corrosive environments where 303/304 stainless steel is not adequate. As with the NEMA Type 4-4x units, Cabinet Cooler is splash resistant, for use in wash down environments as well as outdoor use and 316L Stainless steel has pharmaceutical grade, food service and extreme corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use. The Cabinet Cooler is normally mounted on the top of the enclosure but if space does not permit, you can use our Side Mount Kit. Using a thermostat and solenoid valve will help to control the air consumption. Cabinet Panel Coolers Mod. AIR-CC125-IP66 See also: VORTEX TUBES, TOOL COOLING  Download the PDF Doc for more information: Data Sheet Outline Pdf Outline Dwg
Cabinet panel cooler AIR-CC130-IP66
Cooling capacities
615 Watt
Air consumption (SCFM/SLPM)
30 SCFM (850 SLPM)
$475.58
Tax excluded
 Cabinet Cooler system for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Unlike many of our competitors all of the our Cabinet Cooler  Cabinet Panel Coolers are stainless steel, not just the vortex tube for longer life and flexible use. Cabinet Cooler are compact and can be installed in minutes through a hole in the enclosure. There are virtually no moving parts. Cabinet Panel Cooler are ideal for all IP54, IP14 and IP66.  Prevent downtime due to overheating electric and electronic control panels and cabinets.  Cabinet Cooler NEMA Type 4-4X-316L (IP-66) For Electronic Control Panels – all external exposed surfaces are of 316L, ideal for pharmaceutical industry and extreme corrosive environments where 303/304 stainless steel is not adequate. As with the NEMA Type 4-4x units, Cabinet Cooler is splash resistant, for use in wash down environments as well as outdoor use and 316L Stainless steel has pharmaceutical grade, food service and extreme corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use. The Cabinet Cooler is normally mounted on the top of the enclosure but if space does not permit, you can use our Side Mount Kit. Using a thermostat and solenoid valve will help to control the air consumption. Cabinet Panel Coolers Mod. AIR-CC130-IP66 See also: VORTEX TUBES, TOOL COOLING  Download the PDF Doc for more information: Data Sheet Outline Pdf Outline Dwg
Cabinet panel cooler AIR-CC140-IP66
Cooling capacities
849 Watt
Air consumption (SCFM/SLPM)
39.3 SCFM (1133 SLPM)
$475.58
Tax excluded
 Cabinet Cooler system for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Unlike many of our competitors all of the our Cabinet Cooler  Cabinet Panel Coolers are stainless steel, not just the vortex tube for longer life and flexible use. Cabinet Cooler are compact and can be installed in minutes through a hole in the enclosure. There are virtually no moving parts. Cabinet Panel Cooler are ideal for all IP54, IP14 and IP66.  Prevent downtime due to overheating electric and electronic control panels and cabinets.  Cabinet Cooler NEMA Type 4-4X-316L (IP-66) For Electronic Control Panels – all external exposed surfaces are of 316L, ideal for pharmaceutical industry and extreme corrosive environments where 303/304 stainless steel is not adequate. As with the NEMA Type 4-4x units, Cabinet Cooler is splash resistant, for use in wash down environments as well as outdoor use and 316L Stainless steel has pharmaceutical grade, food service and extreme corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use. The Cabinet Cooler is normally mounted on the top of the enclosure but if space does not permit, you can use our Side Mount Kit. Using a thermostat and solenoid valve will help to control the air consumption. Cabinet Panel Coolers Mod. AIR-CC140-IP66 See also: VORTEX TUBES, TOOL COOLING  Download the PDF Doc for more information: Data Sheet Outline Pdf Outline Dwg
Cabinet panel cooler AIR-CC110-316L-IP66
Cooling capacities
214 Watt
Air consumption (SCFM/SLPM)
10 SCFM (283 SLPM )
$1,643.70
Tax excluded
 Cabinet Cooler system for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Unlike many of our competitors all of the our Cabinet Cooler  Cabinet Panel Coolers are stainless steel, not just the vortex tube for longer life and flexible use. Cabinet Cooler are compact and can be installed in minutes through a hole in the enclosure. There are virtually no moving parts. Cabinet Panel Cooler are ideal for all IP54, IP14 and IP66.  Prevent downtime due to overheating electric and electronic control panels and cabinets.  Cabinet Cooler NEMA Type 4-4X-316L (IP-66) For Electronic Control Panels – all external exposed surfaces are of 316L, ideal for pharmaceutical industry and extreme corrosive environments where 303/304 stainless steel is not adequate. As with the NEMA Type 4-4x units, Cabinet Cooler is splash resistant, for use in wash down environments as well as outdoor use and 316L Stainless steel has pharmaceutical grade, food service and extreme corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use. The Cabinet Cooler is normally mounted on the top of the enclosure but if space does not permit, you can use our Side Mount Kit. Using a thermostat and solenoid valve will help to control the air consumption. Cabinet Panel Coolers Mod. AIR-CC110-316L-IP66 See also:VORTEX TUBES, TOOL COOLING Download the PDF Doc for more information: Data Sheet Outline Pdf Outline Dwg
Enfriador de tablero electrico AIR-CC115-316L-IP66
Cooling capacities
322 Watt
Air consumption (SCFM/SLPM)
15 SCFM (425 SLPM)
$821.85
Tax excluded
 Cabinet Cooler system for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Unlike many of our competitors all of the our Cabinet Cooler  Cabinet Panel Coolers are stainless steel, not just the vortex tube for longer life and flexible use. Cabinet Cooler are compact and can be installed in minutes through a hole in the enclosure. There are virtually no moving parts. Cabinet Panel Cooler are ideal for all IP54, IP14 and IP66.  Prevent downtime due to overheating electric and electronic control panels and cabinets.  Cabinet Cooler NEMA Type 4-4X-316L (IP-66) For Electronic Control Panels – all external exposed surfaces are of 316L, ideal for pharmaceutical industry and extreme corrosive environments where 303/304 stainless steel is not adequate. As with the NEMA Type 4-4x units, Cabinet Cooler is splash resistant, for use in wash down environments as well as outdoor use and 316L Stainless steel has pharmaceutical grade, food service and extreme corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use. The Cabinet Cooler is normally mounted on the top of the enclosure but if space does not permit, you can use our Side Mount Kit. Using a thermostat and solenoid valve will help to control the air consumption. Cabinet Panel Coolers Mod. AIR-CC115-316L-IP66 See also: VORTEX TUBES, TOOL COOLING  Download the PDF Doc for more information: Data Sheet Outline Pdf Outline Dwg
Cabinet panel cooler AIR-CC125-316L-IP66
Cooling capacities
527 Watt
Air consumption (SCFM/SLPM)
25 SCFM (708 SLPM)
$821.85
Tax excluded
 Cabinet Cooler system for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Unlike many of our competitors all of the our Cabinet Cooler  Cabinet Panel Coolers are stainless steel, not just the vortex tube for longer life and flexible use. Cabinet Cooler are compact and can be installed in minutes through a hole in the enclosure. There are virtually no moving parts. Cabinet Panel Cooler are ideal for all IP54, IP14 and IP66.  Prevent downtime due to overheating electric and electronic control panels and cabinets.  Cabinet Cooler NEMA Type 4-4X-316L (IP-66) For Electronic Control Panels – all external exposed surfaces are of 316L, ideal for pharmaceutical industry and extreme corrosive environments where 303/304 stainless steel is not adequate. As with the NEMA Type 4-4x units, Cabinet Cooler is splash resistant, for use in wash down environments as well as outdoor use and 316L Stainless steel has pharmaceutical grade, food service and extreme corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use. The Cabinet Cooler is normally mounted on the top of the enclosure but if space does not permit, you can use our Side Mount Kit. Using a thermostat and solenoid valve will help to control the air consumption. Cabinet Panel Coolers Mod. AIR-CC125-316L-IP66 See also: VORTEX TUBES, TOOL COOLING  Download the PDF Doc for more information: Data Sheet Outline Pdf Outline Dwg
Cabinet panel cooler AIR-CC130-316L-IP66
Cooling capacities
615 Watt
Air consumption (SCFM/SLPM)
30 SCFM (850 SLPM)
$821.85
Tax excluded
 Cabinet Cooler system for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Unlike many of our competitors all of the our Cabinet Cooler  Cabinet Panel Coolers are stainless steel, not just the vortex tube for longer life and flexible use. Cabinet Cooler are compact and can be installed in minutes through a hole in the enclosure. There are virtually no moving parts. Cabinet Panel Cooler are ideal for all IP54, IP14 and IP66.  Prevent downtime due to overheating electric and electronic control panels and cabinets.  Cabinet Cooler NEMA Type 4-4X-316L (IP-66) For Electronic Control Panels – all external exposed surfaces are of 316L, ideal for pharmaceutical industry and extreme corrosive environments where 303/304 stainless steel is not adequate. As with the NEMA Type 4-4x units, Cabinet Cooler is splash resistant, for use in wash down environments as well as outdoor use and 316L Stainless steel has pharmaceutical grade, food service and extreme corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use. The Cabinet Cooler is normally mounted on the top of the enclosure but if space does not permit, you can use our Side Mount Kit. Using a thermostat and solenoid valve will help to control the air consumption. Cabinet Panel Coolers Mod. AIR-CC130-316L-IP66 See also: VORTEX TUBES, TOOL COOLING  Download the PDF Doc for more information: Data Sheet Outline Pdf Outline Dwg
Cabinet panel cooler AIR-CC140-316L-IP66
Cooling capacities
849 Watt
Air consumption (SCFM/SLPM)
39.3 SCFM (1133 SLPM)
$821.85
Tax excluded
 Cabinet Cooler system for electronic control panels provide a low cost method of both purging and cooling electrical and electronic control panels by using a stainless steel vortex tube to create cold air from ordinary compressed air. Unlike many of our competitors all of the our Cabinet Cooler  Cabinet Panel Coolers are stainless steel, not just the vortex tube for longer life and flexible use. Cabinet Cooler are compact and can be installed in minutes through a hole in the enclosure. There are virtually no moving parts. Cabinet Panel Cooler are ideal for all IP54, IP14 and IP66.  Prevent downtime due to overheating electric and electronic control panels and cabinets.  Cabinet Cooler NEMA Type 4-4X-316L (IP-66) For Electronic Control Panels – all external exposed surfaces are of 316L, ideal for pharmaceutical industry and extreme corrosive environments where 303/304 stainless steel is not adequate. As with the NEMA Type 4-4x units, Cabinet Cooler is splash resistant, for use in wash down environments as well as outdoor use and 316L Stainless steel has pharmaceutical grade, food service and extreme corrosive environments. Stainless steel also provides for long life in wet environments and for outdoor use. The Cabinet Cooler is normally mounted on the top of the enclosure but if space does not permit, you can use our Side Mount Kit. Using a thermostat and solenoid valve will help to control the air consumption. Cabinet Panel Coolers Mod. AIR-CC140-316L-IP66 See also: VORTEX TUBES, TOOL COOLING  Download the PDF Doc for more information: Data Sheet Outline Pdf Outline Dwg